Foxconn G31S-K English Manual. - Page 47

3 PC Health Status Phoenix - AwardBIOS CMOS Setup Utility PC Health Status Case Open Warning [Disabled] Item Help Shutdown Temperature [Disabled] Warning Temperature [Disabled] Menu Level ► CPU Vcore 1.26 V + 3.3V 3.37 V + 5V 4.99 V + 12V 11.84 V VDDR CPU Temperature System Temperature 1.90V 61oC 31oC CPU Fan Speed 0 RPM System Fan Speed 3648 RPM CPU Smart Fan Control [Disabled] x PWM Start Temperature 35 x Start PWM Value 64 x Slope PWM Value 2 x Delta Temperature 3 Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F7: Optimized Defaults ► Case Open Warning This item is used to enable or disable case open warning function. ► Shutdown Temperature This item is used to set the system temperature upper limit. When the temperature exceeds the set value, the system will shut down automatically. ► Warning Temperature This option is used to set the warning temperature for the system. When the temperature of CPU is higher than the set value, the motherboard will send out warning information. ► CPU Vcore/+ 3.3V/+5V/+12V/VDDR The current voltages are automatically detected and displayed by the system. ► CPU/System Temperature The CPU/System temperature are automatically detected and displayed by the system. ► CPU Fan/System Fan Speed The CPU fan/System fan speed are automatically detected and displayed by the system. ► CPU Smart Fan Control This option is used to enable or disable CPU smart fan function. Only when this option is enabled, you can set some correlative parameters. ► PWM Start Temperature It allows you set a temperature value from which smart fan starts its operation. ► Start PWM Value It allows you to set an initial PWM value to drive the fan when the temperature reaches Start value and smart fan begins its operation. The higher PWM value can achieve the faster fan speed. ► Slope PWM Value It controls the PWM value being stepped up or down versus temperature changes. 40