Foxconn Inferno Katana English Manual. - Page 26
OnBoard Debug LED
View all Foxconn Inferno Katana manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
2 2-6 OnBoard Button Power on Button: PWR_ON Push the power on button to power on the system. Reset Button: RST Push the reset button to reboot the system. Clear CMOS Button: CLS_CMOS2 Turn off the AC power supply, push the CLS_CMOS button and hold there for a couple of seconds to clear CMOS. RESET POWER_ON CLS_CMOS Force Reset Button: FORCE_RESET (Only for Inferno Katana) Simply rebooting after applying new OC settings can cause the system to fail because the hardware has not been reset properly. But with one press on the Force Reset button, your system will not only re-boot, but also re-tune itself! This button triggers the CPU, memory controller and chipset to re-initialize, running hardware checks and timing algorithms before reloading with your new overclocking settings. This reduces instances of failed re-boots after implementing OC settings. FORCE_RESET ! ■ Make sure the power supply is turned off before pressing the CLS_CMOS button to clear CMOS. ■ Push down the CLS_CMOS button and hold it there for a couple of seconds to clear the CMOS completely, then release. 2-7 OnBoard Debug LED 2-digital LED readout displays hardware status and enables quick error diagnosis. CAUTION 19 19