Frigidaire FAHE4044MW Complete Owner's Guide (English) - Page 10
Cycle Settings, continued - parts
View all Frigidaire FAHE4044MW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
OPERATING INSTRUCTIONS Cycle Settings, continued Wash Water Temperature To change the preset temperature, press the temp button to scroll to the desired setting. To protect your fabrics, the temperature range from low to high settings may be different depending on cycle selected. The water heater setting and its distance from the washer, water usage in other parts of the home, and seasonally low ground water temperature in some geographic areas can affect water temperature. hot Use this setting for heavily soiled white or colorfast cottons and blends. warm Use this setting for normally soiled white or colorfast cottons or blends. cool Use this setting for normally soiled sheets, casual items and washable woolens. cold Some warm water will automatically blend with cold tap supply to achieve cold. Use this setting for lightly soiled non-colorfast items, knits, delicates, and hand washables. cold water clean Wash and rinse temperatures are equivalent to temperature of cold tap supply. Use this selection for fabrics and colors that are prone to dye transfer. For use with cold water detergents. Spin Speed Max, high, normal and low spin speeds are available for most cycles. The spin speed and/or duration of final spin may vary from model to model and cycle to cycle. Increasing the spin speed will extract more water, decrease drying time and conserve energy. Decreasing the spin speed will reduce wrinkling. Select low spin speed to gently spin items that should be line dried. Use no spin to omit the final spin at the end of the cycle. The load will be very wet. Remove items from the wash drum to drip dry or select a drain & spin or rinse & spin cycle to remove excess water at a more convenient time. Water Level Press the water level button to select a water level appropriate for the load size. For best results, DO NOT overload. Add items loosely to the tub. The dry load should not be higher than the top row of holes in the wash tub. There should be enough water in the tub for items to move freely. Í NOTE Water level is automatically calculated by the washer in the auto setting. The washer will perform a dry load sensing procedure before adding water to the tub. The sensing indicator light will be lit. Soil Level Adjust duration of agitation time based on the soil level of each load. Heavy, normal, light, extra light soil levels are available. Stain treat gives your cycle the agitation time of a heavy selection plus the added benefit of a mid agitation soak. 10