Frigidaire FAHE4044MW Complete Owner's Guide (English) - Page 11

Cycle Options OPERATING INSTRUCTIONS To select an option, press options until the indicator for the desired option flashes, then press select. If an option is not available for a cycle, the indicator will not light. Follow the same steps to delete an option. Occasionally, a setting and option in the same cycle will conflict with each other, like energy saver and fresh water rinse. When this happens, the option selected first will cause the conflicting option to not be selectable. Í NOTE To change options once the cycle has begun, push in the cycle selector knob to pause the cycle, make the new selections and push in the selector knob again to restart the washer. energy saver The energy saver option reduces water temperature to save energy, lowers water usage slightly and also extracts more water to reduce drying time. wrinkle release Wrinkle release adds a deep rinse with warm water to relax existing wrinkles and then lowers the speed of the final spin to prevent setting new ones. freshwater rinse Use this option when additional rinsing is desired to remove excess dirt and detergent. It is recommended for heavily soiled loads or if household members have sensitive skin. chime A signal will sound at the end of the cycle if this option is selected. fabric softener You must turn the fabric softener switch to the "on" position for correct operation of the fabric softener dispenser. See Care and Cleaning for dispenser cleaning procedures. delay start Press delay start to select a wash time convenient to your schedule or during off peak energy hours. The delay time selected will be displayed and begin counting down when you push in the cycle selector knob to start the unit. 11