Frigidaire FAS255P2A Installation Instructions - Page 1

Installation Instructions for Heavy duty Please real ALL installations before installing. Two or more people are recommended to install this product. If a new electrical outlet is required, have the outlet installed by a qualified electrician before installing unit. Preliminary Instructions Do the following before starting to install unit. See illustrations below. 1. Check window opening size - the mounting parts furnished with this air conditioner are made to install in a wooden sill double-hung window. The standard parts are for a window opening of 32''(812 mm) minimum to 43''(1092 mm) maximum width. Open sash to a minimum of 20'' (508 mm). (FIG. 1) WINDOW FOAM SASH SEAL TOP CHANNEL DOUBLE SIDED SEAL SIDE ACCORDION (RIGHT) 2. Check condition of window - all wood parts of window must be in good shape and able to firmly hold the needed screws. If not, make repairs before installing unit. 3. Check your storm windows - if your storm window frame does not allow the clearance required, correct by adding a piece of wood as shown in FIG. 2, or by removing storm window while room air conditioner is being installed. (Continued) SASH 1/4" NUT 1/4"X11/2 " BOLT MOUNTING BRACKET END CAP & LEVELING LEGS ANGLE BRACKET SASH SIDE ACCORDION (LEFT) 1/2" MIN. 20" MIN. 1/2" MIN. 1 1/2" MIN. 20" MIN. STORM WINDOW FRAME OR OTHER OBSTRUCTION Fig. 1 STORM WINDOW FRAME OR OTHER OBSTRUCTION Fig. 2 BOARD THICKNESS AS REQUIRED, ALONG ENTIRE STOOL. FASTEN WITH TWO NAILS OR SCREWS. P/N:819042102-01