Frigidaire FFCE2278LS Complete Owner's Guide (English) - Page 11

Setting Defrost by Weight, Heating with multiple cooking stages, Setting Defrost by Time

Page 11 highlights

Manual Operation Heating with multiple cooking stages Adding cook time (+30sec) For best results, some microwave recipes call for different power levels or different lengths of time for cooking. Your microwave may be set to change from one stage to another automatically (2 stages maximum). Example: to cook food at 80%power for 3 minutes and then 50% power for 6 minutes 30 seconds: Pressing the START/+30sec pad once starts 30 seconds of cooking at a 100% power level. Pressing the START/+30sec pad during cooking adds 30 seconds (for each press) to the cook time. Example: to add 1 minute of cook time. 1. Press Power Level pad. 2. Use the number pads to enter power level for the 1st stage. (80% power). 3. Press START/+30 sec pad. POWER LEVEL 1. Press START/+30sec pad 2 times. NOTE: The "+30sec" function is not available when using the "weight defrost" or any of the "convenience operation" and "sensor operation" features. 4. Use the number pads to enter heating time for the 1st stage (cook time may be set up to 99 minutes and 99 seconds). Setting Defrost by Weight Example: to defrost 0.5 lbs. of food using the automatic defrost cycle (cook time determined automatically) 5. Press Power Level for the 2nd stage. POWER LEVEL 6. Use the number pads to enter power level for the 2nd stage. (50% power) 7. Press START/+30 sec pad. 1. Press Defrost pad 2. Press 2. 3. Use the number pads to enter weight of food to defrost in pounds. You may enter weight from 0.5 to 6.5 pounds. 4. Press START/+30sec pad. 8. Use the number pads to enter heating time for the 2nd stage (cook time may be set up to 99 minutes and 99 seconds). When defrosting has finished, you will hear a series of beeps. The oven beeps during the defrosting cycle to signal that the food needs to be turned or rearranged. 9. Press START/+30 sec pad. When finished, you will hear a series of beeps. NOTE: 1. The "Convenience operation" and "Sensor operation" can not be set as one of multiple cooking. 2. If the 1st stage is the set defrost feature, the 2nd stage can't be set to Defrost again. If one of the stages is weight defrost, that will be the 1st stage when cooking starts. NOTE: The weight amount must be a valid entry for this feature to start. A valid weight entry is 0.5 to 6.5 pounds A decimal point is assumed before the last digit you enter. For example, enter 5 for 0.5 pounds and enter 50 for 5.0 pounds. Setting Defrost by Time Example: to defrost food with the automatic defrost cycle for 5 minutes: 1. Press Defrost pad 2. Press 1. 3. Use the number pads to enter desired defrost time (defrost time may be set up to 99 minutes and 99 seconds). 4. Press START/+30sec pad. When defrost has finished, you will hear a series of beeps. The oven beeps during the defrosting cycle to signal that the food needs to be turned or rearranged. 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22

11
Manual Operation
Adding cook time (+30sec)
1. Press
Defrost
pad
2. Press 1.
3. Use the number pads to enter desired
defrost time (defrost time may be set up to
99 minutes and 99 seconds).
4. Press
START/+30sec
pad.
When defrost has finished, you will hear a series of beeps.
Setting Defrost by Weight
1. Press
Defrost
pad
2. Press 2.
3.
Use the number pads to enter weight of
food to defrost in pounds. You may enter
weight from 0.5 to 6.5 pounds.
4. Press
START/+30sec
pad.
When defrosting has finished, you will hear a series of
beeps. The oven beeps during the defrosting cycle to
NOTE:
The weight amount must be a valid entry for this
feature to start. A valid weight entry is 0.5 to 6.5 pounds A
decimal point is assumed before the last digit you enter.
For example, enter 5 for 0.5 pounds and enter 50 for 5.0
pounds.
Heating with multiple cooking stages
Example: to cook food at 80%power for 3 minutes and
then 50% power for 6 minutes 30 seconds:
For best results, some microwave recipes call for different
power levels or different lengths of time for cooking. Your
microwave may be set to change from one stage to another
automatically (2 stages maximum).
1. Press
Power Level
pad.
2.
Use the number pads to enter power level
for the 1st stage.
(80% power).
3. Press
START/+30 sec
pad.
4.
Use the number pads to enter heating
time for the 1st
stage (cook time may be
set up to 99 minutes and 99 seconds).
5. Press
Power Level
for the 2nd stage.
6.
Use the number pads to enter power level
for the 2nd stage. (50% power)
7. Press
START/+30 sec
pad.
8.
Use the number pads to enter heating
time for the 2nd stage (cook time may be
set up to 99 minutes and 99 seconds).
9. Press
START/+30 sec
pad.
When finished, you will hear a series of beeps.
NOTE:
1. The “Convenience operation”
and “Sensor operation”
can not be set as one of multiple cooking.
2.
If the 1st stage is the set defrost feature, the 2nd stage
can’t be set to Defrost again. If one of the stages is
weight defrost, that will be the 1st stage when cooking
starts.
POWER
LEVEL
POWER
LEVEL
1. Press
START/+30sec
pad 2 times.
NOTE:
The “
+30sec
” function is not available when using
the “
weight defrost
” or any of the “
convenience
operation
and “
sensor operation
” features.
Pressing the
START/+30sec
pad once starts 30 seconds of
cooking at a 100% power level.
Pressing the
START/+30sec
pad during cooking adds 30
seconds (for each press) to the cook time.
Example: to add 1 minute of cook time.
Example: to defrost 0.5 lbs. of food using the automatic
defrost cycle (cook time determined automatically)
Setting Defrost by Time
Example:
to defrost food with the automatic defrost
cycle for 5 minutes:
signal that the food needs to be turned or rearranged.
The oven beeps during the defrosting cycle to signal
that the food needs to be turned or rearranged.