Frigidaire FFHP124WS1 Installation Instructions - Page 10
Installing the Wall Mounting Bracket, Drilling the Hole
View all Frigidaire FFHP124WS1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
B 0.2"-0.28" Indoor unit outline 6" or more from the wall 6" or more from the ceiling A Wall mounting bracket 6" or more from the wall 1.97'' Refrigerant pipe hole (right) Ø 2.56" 3.94'' ≥28000 Btu's (A:53.15" B:12.83") 1.97'' Refrigerant pipe hole (right) Ø 2.56" 4.88'' Installing the Wall Mounting Bracket 1. Install the wall mounting bracket horizontally over the structural parts on the wall using the spaces indicated on the bracket, as shown in figure 1.3. 2. In the case of tiled, concrete or similar walls, create 13/64" diameter holes. Place anchor supports for the appropriate assembly screws. 3. Install the wall mounting bracket to the wall with eight A type screws. 4. At all times securing to the wall studs is recommended. Wall mounting bracket Figure 1.3 Attention!!! Fit the wall mounting bracket and drill holes in the wall according to the wall structure and corresponding mounting points on the wall mounting bracket (Dimensions are in "inches" unless otherwise stated). Drilling the Hole 1. Determine the position of the hole for the pipes using the wall mounting bracket and drill the pipe hole so that it is tilted slightly downward. 2. Always use a pipe cover with an opening when drilling. Indoor unit Wall Outdoor unit 09 Indoor unit installation