Frigidaire FFRA2822U2 Installation Instructions - Page 2

Installation Instructions 4. Check for anything that could block airflow Check area outside of window for things such as shrubs, trees, or awnings. Inside, be sure furniture, drapes, or blinds will not stop proper air flow. 5. Check the available electrical service Power supply must be the same as that shown on the unit serial nameplate. (See Use & Care Guide for serial plate location.) Power cord is 48" long. Be sure you have an outlet near. All models have a 3-prong service plug to provide proper service and WARNING Avoid fire hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove any prong from the power cord. safe positive grouding. Do not change plug in any way. Do not use an adapter plug. If your present wall outlet does not match your plug, call a qualified electrician to make the needed change. 6. Carefully unpack air conditioner Remove all packing material. Protect floor or other stable flat surface with covering to prevent scratches from unit. With the aid of an assistant, remove unit from styrofoam base and rest on protected 115V 15A 230V 15A 230V 20A surface. Move and install unit with the aid of an assistant. Save packing and shipping box for future unit storage. Grounding Prong Accessory Kit includes Hardware bag(shipped inside window support brackets) Window support bracket (2) Foam gasket Window sash seal Side retainer (2) Bottom rail seal 230V 30A Do not, under any circumstances, cut, remove or bypass the grounding prong. Window Filler Panel (2) Top angle rail FIG.3 Top angle rail can be found in top packing foam (FIG.3) TOP ANGLE RAIL Tools Required a large flat blade screwdriver tape measure adjustable wrench or pliers pencil level Socket wrenches Phillips screwdriver Hardware ( in plastic bag) 7/16" Locking Screw and Flat Washer for window filler panels 1/2" Long hex head screw Qty. 2 ea 7 Safety Lock 1 1/2" Long Screw and locknut 3/4" Long Flat Head Bolt and Locknut 4 ea 2 ea foam insert (Only for BN Platform) 2 2 Hardware ( in plastic bag) Qty. Sill Angle Bracket 2 Long hex-head locking screw for top angle rail, side retainer 5/16" long 10 Safety Lock (for Vinyl-Clad window) 2 Locking screw #10 X 1/4" panhead Phillips screws (for Vinyl-Clad window) 2 weather stripping 5 (6"X3/4"X1/12")