Frigidaire FPCF3091LF Complete Owner's Guide (English) - Page 30

SETTING OVEN CONTROLS Adjusting the oven temperature Your appliance has been factory calibrated and tested to ensure an accurate baking temperature. For the first few uses, follow your recipe times and temperature recommendations carefully. If you think the oven is cooking too hot or too cool for your recipe times, you can adjust the control so the oven cooks hotter or cooler than the temperature displayed. The oven temperature may be increased +35°F (+19°C) or decreased -35°F (-19°C) from the factory settings. Example: increase the oven temperature by 30°F: Step Press 1. Press and hold bake for 6 seconds. 2. Enter 30. 3. Press start. Example: decrease the oven temperature by 30°F: Step Press 1. Press and hold bake for 6 seconds. 2. Enter 30. 3. Press self-clean. 4. Press start. NOTES Oven temperature adjustments made will not affect the broil or self-cleaning feature temperatures. If the temperature shows an adjustment of -30°F, and a +30°F adjustment is needed, you can toggle between the (-) or (+) in the display by pressing self clean. DO NOT USE oven thermometers such as those found in grocery stores to check the temperature settings inside your oven. These oven thermometers may vary as much as 20 to 40 degrees from actual temperatures. Restoring factory default settings When new, your appliance left the factory with predetermined oven control default settings. Over time, the user may make changes to these settings. The following options have user preferences that could be modified and may have been changed since the appliance was new: • 12 or 24 hour display mode • Continuous bake or 6-Hour Energy Savings mode • Silent control panel • Oven temperature display (Fahrenheit or Celsius) • Adjusting the oven temperature • My favorite Please remember that if you choose to restore, ALL of the above preferences will be restored to factory default settings, the oven temperature offset will reset and any stored information will be cleared. To restore all user settings to factory default: Step Press 1. Press and hold 7 key pad until first beep sounds (about 6 seconds). 2. Press start. Operating the oven light The interior oven light will automatically turn ON when the oven door is opened. Press to turn the interior oven light ON and OFF whenever the oven door is closed. The interior oven light is located at the upper left rear wall of the oven interior and is covered with a glass shield. The glass shield must be in place whenever the oven is in use. The shield will protect the halogen bulb from food splatters. To change the interior oven light, see "Changing the oven light" in the Care & Cleaning section. 30