Frigidaire FPES3085KF Installation Instructions (All Languages) - Page 2

30" ELECTRIC SLIDE-IN RANGE INSTALLATION INSTRUCTIONS NOTES: 1. Do not pinch the power supply cord or the flexible gas conduit between the range and the wall. 2. Do not seal the range to the side cabinets. 3. 24" (61 cm) minimum clearance between the cooktop and the bottom of the cabinet when the bottom of wood or metal cabinet is protected by not less than ¼" (0,64 cm) flame retardant millboard covered with not less than No. 28 MSG sheet Door Open metal, 0,015"(0,4 mm) stainless steel, (see note 5) 0,024"(0,6 mm) aluminum, or 0,020" (0,5 mm) copper. 30" (76,2 cm) minimum clearance when the cabinet is unprotected. 4. For cutouts below 22 7/8"(58,1 cm), appliance will slightly show out of the cabinet. 5. Allow at least 19 ¼" (48,9 cm) clearance for door depth when it is B open. 21¾" (55.25 cm) C A D Side Panel *** IMPORTANT: To avoid cooktop breakage for cutout width (E dimension) of more than 30 1/16" (76,4 cm), make sure the appliance is centered in the counter opening while pushing into it. Raise leveling legs at a higher position than the cabinet height (see page 3), insert the appliance in the counter and then level. Make sure the unit is supported by the leveling legs and NOT by the cooktop itself. IMPORTANT: Cabinet and countertop width should match the cutout width. E 22 7/8"(58,1 cm) min. 23 1/4"(59,05 cm) max. (see Note 4) 1 1/8" (2,86 cm) E FRONT OF CABINET F Ref. A. HEIGHT (Under Cooktop) 35 7/8" (91,1 cm) 36 5/8" (93 cm) B. WIDTH 30" (76,2 cm) C. COOKTOP WIDTH 31 5/16" (79.5 cm) D. TOTAL DEPTH TO FRONT OF RANGE 28 5/16" (71,9 cm) E. CUTOUT WIDTH*** (Countertop and cabinet) 30±1/16" (76,2±0,15 cm) F. CUTOUT DEPTH 21 3/4" (55,2 cm) Min. 22 1/8" (56,2 cm) Max 24" (61 cm) Min. with backguard G. HEIGHT OF COUNTERTOP 35 7/8" (91,1 cm) Min. 36 5/8" (93 cm) Max. 2