Frigidaire FPES3085KF Installation Instructions (All Languages) - Page 3
To avoid breakage: Do NOT handle or, manipulate the unit by the cooktop glass.
UPC - 057112101514
View all Frigidaire FPES3085KF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
30" ELECTRIC SLIDE-IN RANGE INSTALLATION INSTRUCTIONS To avoid breakage: Do NOT handle or manipulate the unit by the cooktop glass. 1 The counter-top around the cut-out should be flat and leveled (see hatched area on illustration 1). Before installing the unit, measure the heights of the two (2) 2 cabinet sides (H1-4), front and back (see illustration 1) from the floor to the top of the counter. Level the range using the Shave four (4) leveling legs so Raised 1 ½" Max. (3.8 cm Max.) that the height from the Edge to Clear 3 floor to the underside of Space for a the cooktop glass frame 31½" (81 cm) H2 H1 is greater than the tallest Wide Cooktop. H3 cabinet measurement by at least 1/16" (see illustration 2). Illustration 1 4 Slide the unit into the cabinet. Make sure the center of the unit is aligned with the center of the cabinet cut-out. Remove the protective channels on each side of the glass cook- 5 top (if provided). The metal flange under each side of the cooktop MUST be placed over the cabinet countertop for proper unit support. 6 The glass cooktop should NOT directly touch the countertop (see illustration 2) or could cause glass breakage voiding the warranty. Level the unit if needed. H4 GFlraasms e After the installation, MAKE SURE that the unit 7 is supported by the leveling legs NOT by the cooktop. To successfully install the range, the initial level height from floor to underside of cooktop glass frame should be at least 1/16" taller than cabinet sides as measured in step 1. Illustration 2 3