Frigidaire GLET1031FS Operating Instructions (Operating Instructions) - Page 1

COOL DOWN 20 30 40 START DRYER OPERATING INSTRUCTIONS AUTOMATIC PERM PRESS START PRESS SAVER / ON FABRIC SENTRY 50 TIMED DRY 60 70 MORE DRY COOL LESS DRY DOWN AUTOMATIC REGULAR TEMPERATURE KNITS/DELICATES LOW HEAT PERM PRESS MEDIUM HEAT AIR FLUFF NO HEAT REGULAR HIGH HEAT Before Operating Your Dryer Read your Owner's Guide. It has important safety and warranty information. It also has many suggestions for best drying results. To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS in your owner's guide before operating this appliance. Operating Steps Read Drying Procedures in your Owner's Guide. It explains these operating steps in detail. 1. Prepare items for drying. 2. Check that lint screen is clean and in place. 3. Load the dryer. If desired, add a dryer fabric softener sheet. 4. Close the dryer door. 5. Set Temperature controls. 6. Turn cycle selector clockwise to desired setting. 7. Start dryer. Turn Start control clockwise to ON. Hold for 1-2 seconds and release. 8. A signal will sound when the cycle ends. 9. Remove items immediately and hang or fold. 10. Clean lint screen after every load. Temperature Selection Always follow directions on fabric care labels. To avoid fire hazard, do not use heat to dry items containing feathers or down, foam rubber, plastics, or similarly textured, rubber-like materials. Use Air Fluff-No Heat setting only. The REGULAR-HIGH HEAT, PERM PRESS-MEDIUM HEAT, and KNITS/DELICATES-LOW HEAT temp-erature settings may be used with any cycle setting. The AIR FLUFF-NO HEAT setting can be used only in the Timed Dry cycle. AIR FLUFF-NO HEAT setting tumbles the load without heat. Use Air Fluff to freshen clothing, pillows or blankets, or to dust draperies. Printed in U.S.A. The dryer has a 5.7kg/12lb dry clothes drying capacity. P/N 137227300 (0905)