Frigidaire GLET1031FS Operating Instructions (Operating Instructions) - Page 3
Before Operating Your Washer, Operating Steps, Cycle Selection, LAUNDRY CENTER WASHER, OPERATING, - lowes
UPC - 012505375965
View all Frigidaire GLET1031FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
LAUNDRY CENTER WASHER OPERATING INSTRUCTIONS WASH/RINSE TEMPERATURE COLD WARM WARM * COLD • COLD COLD HOT COLD WARM COLD LOAD SLIOZEAD(WSAIZTER LEVEL) SMALL (LOW) MEDIUM LARGE (FULL) RESET * * SOME MODELS SOAK/ PREWASH PREWASH 15 12 8 4 REGULAR/WHITES SOAK FINAL SPIN RINSE KNITS/ DELICATES RINSE FINAL SPIN 12 8 4 6 RINSE FINAL SPIN PERM PRESS/COLORS Before Operating Your Washer Read your Washer Owner's Guide. It has important safety and warranty information. It also has many suggestions for best washing results. To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS in your Washer Owner's Guide before operating this appliance. Operating Steps Read Washing Procedures in your Owner's Guide. It explains these operating steps in detail. 1. Sort laundry into loads that can be washed together. 2. Prepare items for washing. 3. Pretreat stains and heavy soil. 4. Add the measured amount of detergent to wash tub before adding the laundry load. 5. If desired, add liquid bleach to bleach dispenser. DO NOT pour bleach directly onto the load. Printed in U.S.A. 6. If desired, add liquid fabric softener to fabric softener dispenser. DO NOT pour fabric softener directly onto wash load. 7. Add laundry load loosely to wash tub. Dry load should not be higher than top of agitator vanes. For best results, DO NOT overload. 8. Select the wash cycle and settings according to type, size and soil level of each load. 9. Close lid and pull out Cycle Selector knob to start washer. The washer will not fill with water, agitate or spin when the lid is open, and will only start to do so if the lid is closed. To stop the washer, push in the Cycle Selector knob. To change a cycle, push in the Cycle Selector knob and turn it clockwise to the desired setting. Pull out the knob to restart the washer. 10. Remove items at end of cycle. Wait about 2-3 minutes for safety lid lock to release. Cycle Selection Push in and turn the Cycle Selector knob clockwise to the desired cycle. For best results, follow the washing instructions on the fabric care labels. The Whites, Colors and Knits/Delicates cycles progress through wash agitation, drain and spin with a spray rinse, rinse agitation, and a final spin. Whites Cycle This cycle provides up to 15 minutes of normal agitation and a fast spin for most fabrics. Colors Cycle This cycle provides up to 12 minutes of normal agitation and a fast spin for cottons and blends with a no-iron finish. A cool down spray rinse helps reduce wrinkling. P/N 137227300 (0905)