Fujitsu A1220 A1220 User's Guide - Page 75
Opening the Memory Compartment, Installing a Memory Module, Alignment Keys, Retainer Clips
View all Fujitsu A1220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
6 Align the memory upgrade module with the component side up. Align the connector edge of the memory upgrade module with the connector slot in the compartment. Be sure the alignment keys line up with those in the slot. Alignment Keys Retainer Clips Figure 29. Opening the Memory Compartment Figure 30. Installing a Memory Module 7 Insert the memory upgrade module at a 45° angle. Press the connector edge of the module firmly down and into the connector until it lodges under the retaining clip. You'll hear a click when it is properly in place. 8 Replace the cover and reinstall the screws. THE MEMORY UPGRADE MODULE IS NOT SOMETHING YOU ROUTINELY REMOVE FROM YOUR NOTEBOOK. ONCE IT IS INSTALLED, YOU CAN LEAVE IT IN PLACE UNLESS YOU WANT TO CHANGE SYSTEM MEMORY CAPACITY. 69 - Memory Upgrade Module