Fujitsu B6230 User Guide - Page 92
Problem, Possible Cause, Possible Solutions, See Power Sources on See Status
UPC - 611343081986
View all Fujitsu B6230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Problem You turn on your LifeBook notebook and nothing seems to happen. (continued) Possible Cause Possible Solutions Power adapter has no power from the AC outlet, airplane jack, or the car's cigarette lighter. Move the AC cord to a different outlet, check for a line switch or tripped circuit breaker for the AC outlet. If you are using an auto/airline adapter in a car make sure the ignition switch is in the On or Accessories position. Your LifeBook notebook turns off all by itself. The power management parameters are set for auto timeouts which are too short for your operating needs. Press any button on the keyboard, or move the mouse to restore operation. If that fails, push the Suspend/Resume button. Check your power management settings, or close your applications and go to the Power Options Properties located in the Control Panel to adjust the timeout values to better suit your needs. You are operating on battery power and ignored a low battery alarm until the battery is at the dead battery state and the system has gone into Dead Battery Suspend mode. Install a power adapter and then push the Suspend/Resume button. See "Power Sources" on page 46. You have a battery failure. Verify the condition of the battery using the Status Indicator panel, and replace or remove any battery that is shorted. See "Status Indicator Panel" on page 21. Your adapter has failed Make sure the adapter is plugged in and the outlet has power. or lost its power source. Your LifeBook notebook will not work on battery alone. The battery is dead. No battery is installed. Replace the battery with a charged one or install a power adapter. Install a charged battery. The battery is improperly installed. Verify that the battery is properly connected by reinstalling it. Your installed battery is faulty. Verify the condition of the battey using the Status Indicator panel and replace or remove any battery that is shorted. See "Status Indicator Panel" on page 21. 87 - Troubleshooting