Fujitsu MAN3367MC Manual/User Guide - Page 35
SCSI Function Specifications, m LVD type Low Voltage Differential
View all Fujitsu MAN3367MC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
2.2 SCSI Function Specifications Table 2.3 shows the SCSI functions provided with the IDD. Table 2.3 SCSI function specifications Item Specification Single-ended type Ο HVD type (High Voltage Differential) × LVD type (Low Voltage Differential) Ο Electrical 160/m LVD type (Low Voltage Differential) Ο requirements (*1) Single-ended type Position where the terminating resistor is mounted on the PCA × Differential type Position where the terminating resistor is mounted on the PCA × TERMPWR signal send function Ο 68 pin P cable connector Ο Connector 80 pin SCA2 connector Ο Data bus parity (Data bus CRC) Ο Bus arbitration function Ο Disconnection/reconnection function Ο Addressing SCSI ID 16-bit SCSI LUN (logical unit number) 8-bit SCSI (Single-Ended type) Data transfer (LVD type) (Synchronous 16-bit SCSI (Single-Ended type) mode) (LVD type) (160/m LVD type) #0 to #15 (Jumper selection) #0 fixed Ο 20 MB/s max. Ο 40 MB/s max. Ο 40 MB/s max. Ο 80 MB/s max. Ο 160 MB/s max. Data buffer 8 MB (MC/MP) Data block length (Logical data length=Physical data length) (*2) 512 to 528 bytes (Fixed length) Ο : Provided × : Not provided (*1) Single-Ended and LVD detect the driver mode by Diffsence signal and automatically change. (*2) Refer to (12) of Section 1.1. C141-E128-01EN 2 - 7