Fujitsu PDS-4222 User Manual - Page 12

PART NAMES AND FUNCTIONS Front 1 2 POWER 3 Control Panel POWER 4 MODE WIDE 56 MENU VOLUME ENTER 78 90 The control panel opens when you press the lower center of the display. If you press the display again, the control panel closes. 1 Power indicator lamp This lamp shows whether the main power is ON or OFF, as follows: Lit (red): Standby Lit (green): Power ON Lit (orange): Power saving (DPMS: Power saving function) mode ON Flashing (red): Malfunction (Flashes differently depending on the type of malfunction. See P. E-6 for more information.) 2 Remote control signal receiver Receives signals from the remote control. 3 Main Power Switch Indicator Indicates the location of the Main Power switch, at the bottom of the display. 4 Power button [POWER] Turns the power ON or OFF when the main power switch, provided at the bottom of the display, is ON. 5 Input mode selector button [MODE] Switches between image input modes. 6 Wide screen selector button [WIDE] Switches the screen over to a desired wide screen. 7 Menu button [MENU] Displays image and sound adjustment menus. 8 Volume adjustment buttons [VOLUME -/+] Adjust the volume. Note: The [ / ] buttons can also be used to scroll through the options when a menu is displayed. 9 Adjustment buttons [ / ] The [ / ] buttons can also be used to scroll through options in a menu, or to change values. 0 Set button [ENTER] Press this button to finalize the selection of a desired option in a menu. Warning The protective circuit built into the display automatically turns the power to OFF if the display has an internal problem. At this time, the power indicator blinks red, indicating that the display is somehow faulty. If you continue using the display as is, fire or electric shock may result. Be sure to first remove the power plug from the receptacle and to contact your dealer immediately. E-10