Fujitsu PDS-4222 User Manual - Page 18

CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT Be sure to turn OFF the power to the display and external equipment before making any connections. No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC model. Contact your dealer for more information. RECEPTACLE Make sure that the power cable's grounding wire is grounded. The display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you will need to have it replaced. Contact your dealer for more information. CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT Carefully check the terminals for position and type before making any connections. Loose connectors can result in image or color problems. Make sure that all connectors are securely inserted into their terminals. When you complete connection, route the cable and secure it with the cable clamper. Then, reinstall the connector cover. Terminal VIDEO INPUT S-VIDEO INPUT COMPONENT VIDEO INPUT RGB INPUT AUDIO INPUT RS-232C Connector BNC S terminal BNC x 3 mD-sub 15-pin BNC x 5 Pin jack D-sub 9-pin Two ferrite cores (with wire clampers) These ferrite cores with wire clampers are used to attenuate undesired signals. When connecting a cable to the external speaker output terminal, attach one of these ferrite cores to the cable near the terminal. E-16