Fujitsu XG0448 Hardware Guide - Page 28
Requirements for Installation Environment, 2.1.1 Installation Requirements - air conditioners
View all Fujitsu XG0448 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
XG0448 Hardware Guide Chapter 2 Installation 2.1 Requirements for Installation Environment Before installing the switch, please check the following: • Make sure that the switch and all the other options shown in this document are available for installation. • All the cables comply with the specifications of the interface connectors. Warning Do not connect cables to interface connectors other than those adaptable to the connector's specifications. Reference "1.1.1 Parts List" (pg.18) Install the product under the following environmental conditions 2.1.1 Installation Requirements Caution Install the product under the following conditions. Using the product outside the required environment may cause failure of the product. Temperature and Humidity Requirements Operation Non-operation Temperature (degrees C) Humidity (%RH) 0 to 40 15 to 85 0 to 50 8 to 90 Power Requirements Item Voltage Frequency Ground Electricity Inrush Current Requirements AC90-264V 50Hz / 60Hz +2%, -4% Separate ground wire from air conditioners and building, and D-class grounding with ground resistance of 100 Ω or less. 133.1W Maximum50A Ensure installation environment that avoids lowering voltage to power supply equipment at the time of power-on due to the inrush current, although there's no impact from the inrush current in normal use. 28 Requirements for Installation Environment