Ganz Security ZN-MDI243M-IR Manual - Page 10
Accessing the camera from the Internet, 3 Adjusting the Image angle, 4 The Live View
View all Ganz Security ZN-MDI243M-IR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
2.2 Accessing the camera from the Internet Once installed, the camera is accessible on the local network (LAN). Configure the router/firewall to allow incoming data traffic to access the camera from the Internet. For security reasons this is usually done on a specific port. Please refer to the documentation for router/firewall for further instructions. 2.3 Adjusting the Image angle To adjust the image angle. 1. Open the Live View page in your web browser. - Select the Setup tab, and open the Analog output page. - Select the 'Video Format'. 2. Connect supplied video monitor cable to video output connector, then connect it to analog monitor with coaxial cable. - Adjust lens position. Or otherwise check the image from the Live View page on your web browser. - Adjust lens position. 2.4 The Live View page Enable/Disable PC Speaker output Enable/Disable PC Microphone input Digital Zoom Snap Shot Full Screen Video Stream change: First stream Second stream Play: Click this button by manually to start the stream Stop: Click this button by manually to stop streaming NOTE: It is possible that not all the buttons described below will be visible unless the Live View page has been customized to display them. 10