Ganz Security ZN-MDI243M-IR Manual - Page 24

Network

Get Ganz Security ZN-MDI243M-IR PDF manuals and user guides View all Ganz Security ZN-MDI243M-IR manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

9. Network 9.1 Network > IP Setup Network Settings Click the Setup > Network > IP Setup to see the current network settings. IP Address Configuration The GANZ PixelPro supports both IP version 4 and IP version 6 (IPv6 will be supported in V3.00). Both versions may be enabled simultaneously, and at least one version should be always enabled. When using IPv4, the IP address could be set automatically via DHCP, or a static IP address could be set manually. If IPv6 is enabled, your camera receives an IP address according to the configuration in the network router. There are also options for setting up notification of changes in the IP address, and for using the Internet Dynamic DNS Service. Notes: • To receive notification whenever the camera's IP address changes (via e.g. DHCP), configure the options for notification of IP address change. See Services below. • If your DHCP server could update a DNS server, you could access the GANZ PixelPro by a host name which is always the same, regardless of the IP address. DNS Configuration DNS (Domain Name Service) provides the translation of host names to IP addresses on your network. •1st DNS server Enter the IP address of the primary DNS server for your network. •2nd DNS server Enter the IP of the Secondary DNS, which is used if the Primary DNS server is unavailable. 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
24
9. Network
9.1 Network > IP Setup
Network Settings
Click the
Setup > Network > IP Setup
to see the current network settings.
IP Address Configuration -
The GANZ PixelPro supports both IP version 4 and IP version 6
(IPv6 will be
supported in V3.00)
. Both versions may be enabled simultaneously, and at least
one version should be always enabled.
When using IPv4, the IP address could be set automatically via DHCP, or a static IP
address could be set manually. If IPv6 is enabled, your camera receives an IP
address according to the configuration in the network router.
There are also options for setting up notification of changes in the IP address, and
for using the Internet Dynamic DNS Service.
Notes:
•
To receive notification whenever the camera’s IP address changes (via
e.g. DHCP), configure the options for notification of IP address change.
See Services below. • If your DHCP server could update a DNS server,
you could access the GANZ PixelPro by a host name which is always
the same, regardless of the IP address.
DNS Configuration
DNS (Domain Name Service) provides the translation of host names to IP
addresses on your network.
•
1st DNS server
Enter the IP address of the primary DNS server for your network.
•
2nd DNS server
Enter the IP of the Secondary DNS, which is used if the Primary DNS server is
unavailable
.