Ganz Security ZN-MDI243M-IR Manual - Page 26

Network > Service Port, 3 Network > RTP

Get Ganz Security ZN-MDI243M-IR PDF manuals and user guides View all Ganz Security ZN-MDI243M-IR manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

9.2 Network > Service Port Service Port HTTP port- The default HTTP port number (80) could be changed to any port within the range 1-65535. This is useful for simple port mapping. RTSP port- The RTSP protocol allows a connecting client to start an H.264 stream. Enter the RTSP port number to use. The default setting is 554. NOTE: After changing the default port numbers, the user can use the "MultiUpgradeTool.exe" to search and connect automatically. 9.3 Network > RTP RTP port range , Multicast Setup These settings are the IP address, port number, and Time-To-Live value to use for the video stream(s) in multicast H.264 format. Only certain IP addresses and port numbers should be used for multicast streams. 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
26
9.2 Network > Service Port
Service Port
HTTP port-
The default HTTP port number
(80)
could be changed to any port within the
range 1-65535. This is useful for simple port mapping.
RTSP port-
The RTSP protocol allows a connecting client to start an H.264 stream. Enter
the RTSP port number to use. The default setting is
554
.
NOTE
: After changing the default port numbers, the user can use the
“
MultiUpgradeTool
.exe”
to search and connect automatically.
9.3 Network > RTP
RTP port range , Multicast Setup
These settings are the IP address, port number, and Time-To-Live value to use for
the video stream(s) in multicast H.264 format.
Only certain IP addresses and port numbers should be used for multicast streams.