Garmin Alpha 200i/T 5 Dog Tracking Bundle Owners Manual - Page 19
Viewing E-label Regulatory and Compliance
View all Garmin Alpha 200i/T 5 Dog Tracking Bundle manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Direct Routing: Enables or disables direct routing. Direct routing calculates the most direct route possible to the destination. Activity: Sets an activity while routing. The device calculates routes optimized for the type of activity you are doing. Calculation Method: Sets the method used to calculate your route. Lock On Road: Locks the blue triangle, which represents your position on the map, onto the nearest road. This is most useful when driving or navigating on roads. Off Route Recalculation: Sets recalculation preferences when navigating away from an active route. Avoidance Setup: Sets the types of roads, terrain, and transportation methods to avoid while navigating. Route Transitions: Sets how the device routes from one point on the route to the next. This setting is available only for some activities. The Distance option routes you to the next point on the route when you are within a specified distance of your current point. Sensors Settings Select Setup > Sensors. Tempe Sensor: Allows you to pair a tempe™ sensor and turn a paired tempe sensor on and off. Xero: Allows you to enable or disable your sharing status and make sharing public or private. NOTE: You can share your location from a compatible Xero® device. inReach Remote: Allows you to enable or disable the inReach remote function and device verification. NOTE: You can pair a compatible Garmin device and use it to remotely send messages from your Alpha device. Changing the Units of Measure You can customize units of measure for distance and speed, elevation, and temperature. 1 Select Setup > System > Units. 2 Select a measurement type. 3 Select a unit of measure for the setting. Position Format Settings NOTE: You should not change the position format or the map datum coordinate system unless you are using a map or chart that specifies a different position format. Select Setup > System > Units > Position Format. Position Format: Sets the position format in which a location reading appears. Map Datum: Sets the coordinate system on which the map is structured. Map Spheroid: Shows the coordinate system the device is using. The default coordinate system is WGS 84. Device Information Viewing E-label Regulatory and Compliance Information The label for this device is provided electronically. The e-label may provide regulatory information, such as identification numbers provided by the FCC or regional compliance markings, as well as applicable product and licensing information. 1 Select Setup. 2 Select About. Support and Updates • You can update software and maps for your handheld device and mini dog collar device using Garmin Express™. • You can update software for your dog collar device using Garmin WebUpdater. Product Updates On your computer, install Garmin Express (www.garmin.com /express). This provides easy access to these services for Garmin devices: • Software updates • Map updates • Product registration Updating the Dog Collar Device Software Before you can update the dog collar device software, you must connect the dog collar device to a computer (Connecting the Collar to a Computer, page 17). NOTE: PC only. Updating the software does not erase any of your data or settings. 1 Go to www.garmin.com/products/webupdater. 2 Follow the on-screen instructions. Device Care NOTICE Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause permanent damage. Never use a hard or sharp object to operate the touchscreen, or damage may result. Avoid chemical cleaners, solvents, and insect repellents that can damage plastic components and finishes. Secure the weather cap tightly to prevent damage to the USB port. Avoid extreme shock and harsh treatment, because it can degrade the life of the product. Cleaning the Device 1 Wipe the device using a cloth dampened with a mild detergent solution. 2 Wipe it dry. After cleaning, allow the device to dry completely. Cleaning the Touchscreen 1 Use a soft, clean, lint-free cloth. 2 If necessary, lightly dampen the cloth with water. 3 If using a dampened cloth, turn off the device and disconnect the device from power. 4 Gently wipe the screen with the cloth. Specifications Alpha Handheld Device Specifications Battery type Battery life Operating temperature range Charging temperature range Long-term storage temperature range VHF wireless range ANT+ low power wireless range Rechargeable, replaceable lithium-ion Up to 20 hr. From -20° to 60°C (from -4° to 140°F) From 0° to 45°C (from 32° to 113°F) From 0° to 25°C (from 32° to 77°F) Up to 14.5 km (9 mi.) About 3 m (10 ft.) Device Information 15