Garmin Dash Cam 67W Owners Manual - Page 23
Updating Your Device Using the Garmin Drive App, Garmin Support Center
View all Garmin Dash Cam 67W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Updating Your Device Using the Garmin Drive App The Garmin Drive app notifies you when a software update or a safety camera database update is available for your device. 1 In the Garmin Drive app, select Install Now. The software update is sent to your device. You are notified when the transfer is complete. 2 Disconnect the device from power until the device turns off. 3 Connect the device to power. The device installs the software update. NOTE: Footage is not recorded while the software is updating. Garmin Support Center Go to support.garmin.com for help and information, such as product manuals, frequently asked questions, videos, and customer support. Viewing E-Label Regulatory and Compliance Information 1 From the settings menu, scroll to the bottom of the menu. 2 Select System. 3 Select Regulatory. Restarting the Device You can restart your device if it stops functioning. Hold the power key for 12 seconds. Specifications Operating temperature range From -20° to 60°C (from -4° to 140°F) Charging temperature range From 0° to 45°C (from 32° to 113°F) Input voltage From 4.75 to 5.25 Vdc, 1 A Wireless frequencies 2.4 GHz @ 16 dBm maximum Memory Card Specifications The camera requires a memory card with these specifications. Go to garmin.com/dashcamcards to view a list of recommended memory cards. Type microSDHC or microSDXC Capacity 8 GB or greater Speed class Class 10 or higher File system FAT32 Appendix Constant Power Cable The Constant Power Cable is an always-on, 12V power adapter that connects to the OBD II port in your vehicle. The device can power up to two dash cameras for a selected length of time after you turn off your vehicle. For more information, or to purchase a Constant Power Cable, go to garmin.com. Appendix 19