Garmin DriveAssist 51 LMT-S Owners Manual - Page 26

The address of the location appears at the bottom of the screen. 4 Select the location description. 5 Select Set Location. Dash Cam Settings Select Settings > Dash Cam. Camera Placement: Allows you to set the vehicle height and camera position, and align the dash cam (Aligning the Camera, page 2). Record on Startup: Enables the dash camera to start recording video automatically when you turn on the device. Automatic Incident Detection: Saves video automatically when the device detects a possible driving incident. Record Audio: Enables or disables audio recording while you are recording with the dash cam. Data Overlay: Includes date, time, location, and speed information in the recorded video. Video Resolution: Sets the resolution and quality for video recordings. Record After Power Loss: Continues recording video up to a selected time period after external power is lost. Wireless Network Settings The wireless network settings allow you to manage Wi‑Fi® networks, paired Bluetooth devices, and Bluetooth features. Select Settings > Wireless Networks. Bluetooth: Enables Bluetooth wireless technology. Paired Device Name: The names of paired Bluetooth devices appear in the menu. You can select a device name to change Bluetooth feature settings for that device. Search for Devices: Searches for nearby Bluetooth devices. Friendly Name: Allows you to enter a friendly name that identifies your device on other devices with Bluetooth wireless technology. Wi-Fi: Enables the Wi‑Fi radio. Saved Networks: Allows you to edit or remove saved networks. Search for Networks: Searches for nearby Wi‑Fi networks (Connecting to a Wi‑Fi Network, page 23). Driver Assistance Settings Select Settings > Driver Assistance. Audible Driver Alerts: Enables an audible alert for each type of driver alert (Driver Awareness Features and Alerts, page 3). Fatigue Warning: Alerts you when you have been driving for a long period without a break. Incident Notification: Allows you to set up a contact to be notified when the device detects a possible vehicle incident (Incident Detection and Notifications, page 4). Proximity Alerts: Alerts you when you are near custom points of interest or red light cameras. NOTE: You must have custom points of interest (POIs) loaded for proximity points alerts to display. This feature is not available in all areas. Forward Collision Warning: Allows you to enable and set the sensitivity of the forward collision warning (Forward Collision Warning System, page 5). A higher sensitivity alerts you sooner than a lower sensitivity. Garmin Real Vision™: Enables or disables Garmin Real Vision, which overlays guidance information on a live image from the dash cam (Destination Arrival with Garmin Real Vision, page 7). Go Alert: Alerts you when stopped traffic starts moving (Go Alert, page 5). Lane Departure Warning: Enables an alert when the device detects you may be crossing a lane boundary unintentionally (Lane Departure Warning System, page 5). Backup Camera Settings The backup camera settings allow you to manage paired Garmin backup cameras and camera settings. This menu appears on your navigation device only when the device is connected to a wireless camera receiver cable. See the owner's manual for your backup camera for detailed information about pairing cameras and camera settings. Go to garmin.com /backupcamera to purchase a Garmin backup camera. Select Settings > Backup Camera, and select a paired camera. Unpair: Removes the paired camera. You must pair the camera again before you can view it using this device and cable. Rename: Allows you to rename the paired camera. Guidance Lines: Shows or hides guidance lines and allows you to adjust the position of the guidance lines. babyCam Settings The babyCam settings allow you to manage paired Garmin babyCam™ cameras and camera settings. This menu appears on your navigation device only when the device is connected to a wireless camera receiver cable. See the owner's manual for your camera for detailed information about pairing cameras and camera settings. Go to garmin.com/babycam to purchase a Garmin babyCam camera. Select Settings > babyCam, and select a paired camera. Power Settings: Allows you to set the amount of time the video appears on the screen. Flip Video: Allows you to flip or mirror the video. Alignment: Displays the babyCam video to help you align the camera. Check Seat Reminder: Enables a reminder to check for rear seat passengers before exiting the vehicle. Unpair: Removes the paired camera. Rename: Allows you to rename the paired camera. Display Settings Select Settings > Display. Color Mode: Allows you to select day or night color mode. If you select the Auto option, the device automatically switches to day or night colors based on the time of day. Brightness: Allows you to adjust the display brightness. Display Timeout: Allows you to set the amount of idle time before your device enters sleep mode while using battery power. Screenshot: Allows you to take a picture of the device screen. Screenshots are saved in the Screenshot folder of the device storage. Traffic Settings From the main menu, select Settings > Traffic. Traffic: Enables traffic. Current Provider: Sets the traffic provider to use for traffic data. The Auto option selects the best available traffic data automatically. Subscriptions: Lists the current traffic subscriptions. Optimize Route: Enables the device to use optimized alternate routes automatically or upon request (Avoiding Traffic Delays on Your Route, page 8). 22 Garmin DriveAssist Settings