Garmin Fishfinder 160C Owner's Manual - Page 11
Unit Installation, Tool List not included - mounting bracket
UPC - 753759047948
View all Garmin Fishfinder 160C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Unit Installation Choose a location that provides optimal viewing and allows easy access to the unit's keypad. Select a mounting surface strong enough to support the weight of the unit and protect it from excessive vibration or shock. DO NOT mount the bracket in a location where the unit is exposed to extreme temperature conditions. When installing the mounting bracket, be sure to allow room for the connection and routing of the power cable. Tool List (not included)-drill, screwdriver (Phillips or standard), three #8 pan-head machine bolts with matching nuts and washers, and a 5/32" drill bit, OR three #8 pan head self-tapping screws, and a 1/16" drill bit. To mount the bracket assembly: 1. Using the swivel base as a template, mark the location of the three mounting holes. 2. If securing the base with machine bolts, drill three 5/32" holes at the locations you marked. If securing the base using selftapping screws, drill 1/16" starter holes at the locations you marked. Generally, starter holes should be no deeper than half the screw length. 3. Secure the swivel base with three bolts or screws. DO NOT OVERTIGHTEN. 4. Attach the swivel bracket and secure it with the short knob. Fishfinder 160C Owner's Manual Installing the Fishfinder 160C > Unit Installation Mounting Holes Short Knob Swivel Base Swivel Bracket and Base