Garmin Fishfinder 160C Owner's Manual - Page 26

Operating Instructions > The Setup Menu Reset Distance Reset Distance appears only if you are using a speed-capable transducer. Reset Distance resets the displayed Distance to zero. Units Depth Choose to show measurements in Feet (ft, default), Meters (m) or Fathoms (fa). Temperature Choose to show the water temperature in Fahrenheit (°F, default) or Celsius (°C). Speed Choose to show Speed in Miles per Hour (mph, default), Kilometers per Hour (kph), or Knots (kt). Distance Choose to show Distance in Miles (mi, default), Nautical Miles (nm), or Kilometers (km). 20 System Simulator The Fishfinder 160C comes with a built-in Simulator mode that allows you to practice and learn the operation of the unit at home rather than on the water. The unit indicates that it is running the Simulator mode by showing in the lower-left of the screen. While in the simulator mode, the unit displays a simulated bottom scene, and the Fishfinder 160C can be controlled (except Gain) just as if it were on the water. To exit Simulator mode, turn the unit off. If no keys are pressed for 1 minute, the unit automatically resets while in Simulator mode. At startup if a transducer is not detected, the unit automatically starts in Simulator mode. Language Choose to display information in one of four languages. Fishfinder 160C Owner's Manual