Garmin GA 30 Installation Instructions (Multilingual) - Page 6

Specifications, Under-deck Mounting the GA 30 Antenna - manual

Page 6 highlights

Under-deck Mounting the GA 30 Antenna The GA 30 antenna can be mounted under a fiberglass surface with the adhesive pads attached to the under-deck mounting bracket. The GA 30 will not acquire satellite signals through metal-you can only use the under-deck mount under a fiberglass surface. 1. Determine the location on the fiberglass surface where you want to mount the GA 30. 2. Place the adhesive pads on the under-deck mounting bracket. 3. Place the GA 30 in the under- deck mounting bracket. Adhesive 4. Adhere the under-deck pads mounting bracket to the mounting surface. Mounting 5. Secure the under-deck mount surface to the mounting surface with screws. Use extreme care to ensure that the screws do not penetrate the upper surface of the deck. 6. Connect the cable to the GA 30. GA 30 antenna Under-deck mounting bracket 7. Route the cable away from sources of electronic interference, and connect it to your GPS device using the BNC connector. Specifications Dimensions: 3 /19 32 in. (91.6 mm) Diameter × 1 /15 16 in. (49.5 mm) Height Weight: 7.1 oz. (201 g) Case Material: Fully gasketed, high-impact plastic alloy, waterproof to IEC 529 IPX7 standards Operating Range: From -40°F to 176°F (from -40°C to 80°C) Cable: Foil-shielded, center conductor 18 AWG Connector: Antenna-Proprietary twist-lock connector GPS unit-BNC Dynamics: 999 knots, 40g © 2009 Garmin Ltd. or its subsidiaries All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. Information in this document is subject to change without notice. Garmin reserves the right to change or improve its products and to make changes in the content without obligation to notify any person or organization of such changes or improvements. Visit the Garmin Web site (www.garmin.com) for current updates and supplemental information concerning the use and operation of this and other Garmin products. Garmin® and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may not be used without the express permission of Garmin.  GA 30 GPS Antenna Installation Instructions

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

³
GA 30 GPS Antenna Installation Instructions
Under-deck Mounting the GA 30 Antenna
The GA 30 antenna can be mounted under a fiberglass surface with the adhesive pads attached
to the under-deck mounting bracket. The GA 30 will not acquire satellite signals through
metal—you can only use the under-deck mount under a fiberglass surface.
1. Determine the location on the fiberglass surface where you want to mount the GA 30.
2. Place the adhesive pads on the under-deck mounting bracket.
3. Place the GA 30 in the under-
deck mounting bracket.
4. Adhere the under-deck
mounting bracket to the
mounting surface.
5. Secure the under-deck mount
to the mounting surface with
screws. Use extreme care to
ensure that the screws do not
penetrate the upper surface of the
deck.
6. Connect the cable to the GA 30.
7. Route the cable away from sources
of electronic interference, and connect it to your GPS device using the BNC connector.
Specifications
Dimensions:
3
19
/
32
in. (91.6 mm) Diameter × 1
15
/
16
in. (49.5 mm) Height
Weight:
7.1 oz. (201 g)
Case Material:
Fully gasketed, high-impact plastic alloy, waterproof to
IEC 529 IPX7 standards
Operating
Range:
From -40°F to 176°F (from -40°C to 80°C)
Cable:
Foil-shielded, center conductor 18 AWG
Connector:
Antenna—Proprietary twist-lock connector
GPS unit—BNC
Dynamics:
999 knots, 40g
GA 30
antenna
Under-deck
mounting bracket
Mounting
surface
Adhesive
pads
GA 30
antenna
Under-deck
mounting bracket
Mounting
surface
Adhesive
pads
© 2009 Garmin Ltd. or its subsidiaries
All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied,
transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior
written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard
drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto,
provided that such electronic or printed copy of this manual must contain the complete text of this copyright notice
and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly
prohibited.
Information in this document is subject to change without notice. Garmin reserves the right to change or improve its
products and to make changes in the content without obligation to notify any person or organization of such changes
or improvements. Visit the Garmin Web site (
www.garmin.com
) for current updates and supplemental information
concerning the use and operation of this and other Garmin products.
Garmin
®
and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other
countries. These trademarks may not be used without the express permission of Garmin.