Garmin GHS 20 Installation Instructions - Page 3

GHS™ 20/20i Installation Instructions These installation instructions are for the GHS 20 and GHS 20i handsets. The GHS 20 is for use with the Garmin® VHF 200 or 300 radio and the GHS 20i is for use with the Garmin VHF 200i or 300i radio. For additional information, refer to the installation instructions provided with your radio. For operational instructions, refer to the owner's manual provided with your radio. Compatibility Your existing VHF 200/200i or VHF 300/300i radio may need a software update to work with the GHS 20/GHS 20i. Consult your Garmin dealer or contact Garmin for information. About the GHS 20/20i The GHS 20/20i handset ➊ comes with a GWH™ 20 receiver ➋, a charging cradle ➌, a belt clip, and the necessary mounting hardware. GHS 20/20i Installation Instructions ➋ ➊ ➌ ➍ ➋ ➎ ➏ On a VHF 200/200i ➍, the GWH 20 will only function correctly when connected to the microphone relocation port in the back. On a VHF 300/300i ➎, the GWH 20 will only function correctly when connected to the STATION 3 connector ➏. Both the GHS 20/20i handset and the GWH 20 receiver should be at least 23 5/8 in. (60 cm) from any compass to avoid interference. EN-3