Garmin GPS 400W Reference Guide - Page 170
large right, small right, small, large, right, Plan Catalog, Active Flight Plan User
View all Garmin GPS 400W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
9 - AUX PAGES Flight Planning To transfer flight plans or user waypoints to/from a second 400W (or 500W) Series unit: 1. While viewing the default Nav page, Flight Plan Catalog, Active Flight Plan page, User Waypoint page, or the User Waypoint page by pressing MENU, scrolling down to "Crossfill" with the large right knob and then pressing ENT. On the Aux Flight Planning page scroll down to "Crossfill" with the large right knob, and then press ENT. 2. Turn the large right knob to highlight the Method field. Turn the small right knob to select "Auto" or "Manual". "Auto" automatically transfers any selection of (or any change to) a direct-to destination or active flight plan, including VNAV parameters, to a second 400W/500W-Series Garmin unit. • Flight Plan-transfers any stored flight plan to/from a second 400W-Series (or 500W-Series) unit, by selecting the flight plan by number. This option is the default when selecting "Crossfill" from the Flight Plan Catalog. • User Waypoints (all)-transfer all stored user waypoints to/from a second 400W/500W-series unit. • User Waypoint-transfer the specified user waypoint to a second 400W/500W-series unit. NOTE: Crossfill requires both 400W and/or 500W series units to have the same Jeppesen NavData® database cycle number. 3. The flashing cursor highlights the transfer data option (TRANSFER) field. Turn the small right knob to display a window of available data options: • Active Flight Plan-transfers the active flight plan, including VNAV parameters, to/from a second 400W-Series (or 500W-Series) Garmin unit in a dual unit installation. This option is the default when selecting "Crossfill" from the 4. Continue turning the small right knob to highlight the desired data option. Press ENT select the highlighted option. 5a. For a stored flight plan ("Flight Plan" data option), the flight plan number field is highlighted. Turn the small right knob to select the desired flight plan and press ENT. OR default Nav Page. Active Flight Plan information is automatically transferred between units 5b. For a specified user waypoint ("User Waypoint" data option), the waypoint identifier field is when the "Auto" method is selected above. highlighted. Use the small and large right 160 190-00356-00 Rev G