Garmin GPSMAP 8012 MFD Owner's Manual - Page 24
Tide, Current, and Celestial, Information, Warning Manager, Viewing Video
View all Garmin GPSMAP 8012 MFD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
2 Select an option: • To set all the readings for the present trip to zero, select Reset Trip. • To set the maximum speed reading to zero, select Reset Maximum Speed. • To set the odometer reading to zero, select Reset Odometer. • To set all the readings to zero, select Reset All. Viewing Graphs Before you can view graphs of various environmental changes, such as temperature, depth, and wind, you must have an appropriate transducer or sensor connected to the network. Select Info > Trip & Graphs > Graphs. Setting the Graph Range and Time Scales You can indicate the amount of time and the range of depth that appear in the depth and water temperature graphs. 1 From a graph, select Graph Setup. 2 Select an option: • To set a time-elapsed scale, select Duration. The default setting is 10 minutes. Increasing the time-elapsed scale allows you to view variations over a longer period of time. Decreasing the time-elapsed scale allows you to view more detail over a shorter period of time. • To set the graph scale, select Scale. Increasing the scale allows you to view more variation in readings. Decreasing the scale allows you to view more detail in the variation. Tide, Current, and Celestial Information Tide Station Information You can view information about a tide station for a specific date and time, including the tide height, and when the next high and low tides will occur. By default, the chartplotter shows tide information for the most recently viewed tide station and for the present date and time. Select Info > Tides & Currents > Tides. Current Station Information NOTE: Current station information is available with certain detailed maps. You can view information about a current station for a specific date and time, including the current speed and level of the current. By default, the chartplotter shows current information for the most recently viewed current station and for the present date and time. Select Info > Tides & Currents > Currents. Celestial Information You can view information about sunrise, sunset, moonrise, moonset, moon phase, and the approximate sky view location of the sun and moon. The center of the screen represents the sky overhead, and the outermost rings represent the horizon. By default, the chartplotter shows celestial information for the present date and time. Select Info > Tides & Currents > Celestial. Viewing Tide Station, Current Station, or Celestial Information for a Different Date 1 Select Info > Tides & Currents. 2 Select Tides, Currents, or Celestial. 3 Select an option. • To view information for a different date, select Change Date > Manual, and enter a date. • To view information for today, select Change Date > Current. • If available, to view information for the day after the date shown, select Next Day. • If available, to view information for the day before the date shown, select Previous Day. Viewing Information for a Different Tide or Current Station 1 Select Info > Tides & Currents. 2 Select Tides or Currents. 3 Select Nearby Stations. 4 Select a station. Viewing Almanac Information from the Navigation Chart 1 From a chart or 3D chart view, select a location. 2 Select Information. 3 Select Tides, Currents, or Celestial. Warning Manager Viewing Messages 1 Select Info > Warning Manager. 2 Select a message. 3 Select Review. Sorting and Filtering Messages 1 Select Info > Warning Manager > Sort/Filter. 2 Select an option to sort or filter the message list. Saving Messages to a Memory Card 1 Insert a memory card into the card slot. 2 Select Info > Warning Manager > Save to Card. Clearing all of the Messages Select Info > Warning Manager > Clear Warning Manager. Viewing Video Before you can view video, you must connect to a compatible source. Select Info > Video. Selecting a Video Source 1 Select Info > Video > Menu. 2 Select Source > Sources. 3 Indicate the source of the video feed. Not all choices listed are available on all models. • To display video for the inputs connected to the chartplotter, select a video option. • To view component video, select Component. • To display real-time data from a computer, select PC. • To simultaneously display four RCA video inputs, select Quad Video. 18 Tide, Current, and Celestial Information