Garmin GTN 750 XM Satellite Radio Activation Instructions - Page 35
G500/G600, GDL 69 Series Activation
View all Garmin GTN 750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
7 G500/G600 - GDL 69 Series Activation Prior to contacting XM, the GDU must be on and operational. For activation you will need your XM Radio IDs and your billing information. Your Radio IDs can be found on the last page of this document. If for some reason you do not have your IDs, you will be able to find your Radio IDs on the XM page in the AUX group. The steps below will take you through the process. 1. Make sure that the aircraft's XM antenna has an unobstructed view of the southern sky. It is not recommended for the aircraft to be in a hangar. 2. Hook up the aircraft to external power if available. The activation process may take 45-60 minutes or more, depending on the demand on the XM activation system. 3. Power on the avionics and allow the G500/G600 to power up. 4. Rotate the large MFD knob clockwise to the first page of the AUX group. Rotate the small MFD knob to the XM Information page. See Figure 7-1. Figure 7-1. XM Information Page 5. A list of Weather Products will also be shown in the middle of the screen. Boxes filled in green will correspond with the type of subscription you have access. For example, if the weather subscription you have purchased allows NEXRAD, the box next to NEXRAD will be green. To see the weather products available for each subscription level see Figure 7-1. 190-00355-04 Rev. J Page 29 GDL 69/69A XM Satellite Radio Activation Procedures