Garmin GTN 750 XM Satellite Radio Activation Instructions - Page 37

7.2 Activating the Radio NOTE Make sure to be specific for requesting a DATA ONLY service under the Data Radio ID and an AUDIO ONLY service under the Audio Radio ID. Most XM receivers in the market have both audio and data services under one ID. The GDL 69 Series will not function correctly with both an audio and a data service activated under one ID. NOTE During the activation process do not change channels or pages during this time. The G500/G600 will need to be on the XM INFORMATION page of the AUX Group when you call for activation. Call 1.800.985.9200 and the XM operator will ask you for your XM Data IDs. Activation should begin once the XM operator has all your information. During activation the XM Information page will show the various Weather Products being activated. The activation process is not complete until a valid service class is shown. Once activation has been completed, verify that the Service Class and Weather Products shown are the services that you purchased. If you are satisfied that you received the products you requested, press the soft key under LOCK. This will bring up a small inset window as shown in Figure 7-3. Rotate the small MFD knob to YES and press the ENT key lock in your activation. Figure 7-3. Lock Activation Screen 7.3 Verifying Subscribed Services When the data radio (weather receiver) has been activated, the subscription level will be shown in the service class field. See Figure 7-1. Rotate the large MFD knob to the XM Radio page. Press the CHand CH+ soft key to verify that the channel changes. You should see a complete listing of all the channels of your subscription as shown in Figure 7-4. 190-00355-04 Rev. J Page 31 GDL 69/69A XM Satellite Radio Activation Procedures