Garmin LiveScope Plus LVS34-IF Transducer Installation Instructions - Page 4
Specifications, Open-Source Software License, Open-Source, License, Cleaning the Transducer - how to use livescope transducer
View all Garmin LiveScope Plus LVS34-IF Transducer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Specifications LVS34 Specifications Dimensions (L x H x W) Weight (transducer only) Frequencies Operating temperature Storage temperature Maximum depth/distance1 Field of view 161.7 x 77.5 x 47.8 mm (6.37 x 3.05 x 1.88 in.) 1018 g (2.25 lb.) From 530 to 1,100 kHz From -10° to 40°C (from 14° to 104°F) From -40° to 85°C (from -40° to 185°F) 61 m (200 ft.) Front to back: 135 degrees Side-to-side: 20 degrees Open-Source Software License To view the open-source software license(s) used in this product, go to developer.garmin.com/open-source /linux/. Cleaning the Transducer Aquatic fouling accumulates quickly and can reduce your device's performance. 1 Remove the fouling with a soft cloth and mild detergent. 2 Wipe the device dry. © 2022 Garmin Ltd. or its subsidiaries Garmin® and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. LiveScope™ and GLS™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin. M/N: B04391 Garmin Corporation 1 Dependent upon water salinity, bottom type, and other water conditions. © 2022 Garmin Ltd. or its subsidiaries support.garmin.com