Garmin PRO Control 2 Remote Launch System Owner s Manual PDF - Page 6

PRO Control 2 Receiver Overview, Remote Control Keys, Remote Control Display, Receiver Pairing - is launch control 2 step

Get Garmin PRO Control 2 Remote Launch System PDF manuals and user guides View all Garmin PRO Control 2 Remote Launch System manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

PRO Control 2 Receiver Overview 3.5 mm line-out audio jack (under weather cap) À USB port (under weather cap) Á LED  Power key à 3.5 mm output jacks (under weather cap) Ä Remote Control Keys Selected receiver number À NOTE: A letter indicating the order of rapid launch activation may also appear. L indicates left ports activate first, and r indicates right ports activate first. Battery charge level Á Selected sound  Receiver Pairing You can pair the PRO Control 2 handheld device with a PRO Control 2 receiver (Pairing a PRO Control 2 Receiver, page 2) or a PRO Control G Series receiver (Pairing with a PRO Control G Series Receiver, page 2). Pairing a PRO Control 2 Receiver Before you can control a PRO Control 2 receiver with the handheld device, you must pair them. 1 On the handheld device, select MODE, and select the remote launcher mode (Selecting an Operating Mode, page 1). When you are in remote launcher mode, training mode indicators do not appear on the LCD display of the À handheld device. Select to use rapid launch. À Select to switch between remote launcher mode and dog training Á mode. Select to play the receiver sound.  Select to activate the left port of the receiver. à Select to activate the right port of the receiver. Ä Select to change the active receiver or to select the order of rapid Å launch activation. Select to change the receiver sound. Æ Remote Control Display 2 On the handheld device, select or to select the number of the receiver to pair. The number of the receiver appears on the LCD display of the handheld device. 3 Hold the power key from 3 to 5 seconds until the LED on the receiver is solid green and changes to solid blue. You can perform this step even if the receiver is turned off initially. You must continue to hold the power key while pairing. 4 While the LED on the receiver is blue, select L, R, or on the handheld device. The handheld device beeps when the devices are paired. 5 Select to verify that the receiver paired. CAUTION The speaker is very loud. You should avoid activating the speaker near a person. If you must use the speaker near a person, muffle the speaker before activating it to decrease the volume. The speaker plays the current sound. Pairing with a PRO Control G Series Receiver Before you can control your receiver with your PRO Control 2 handheld device, you must pair the receiver with the handheld device. 1 On the handheld device, select or to choose the number with which to pair the receiver. TIP: The selected number determines the sound played by receiver when you select (PRO Control G Series Receiver Sounds, page 4). 2 If necessary, turn on the receiver. 3 On the receiver, select SET. 2 Remote Training Devices

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
PRO Control 2 Receiver Overview
À
3.5 mm line-out audio jack (under weather cap)
Á
USB port (under weather cap)
Â
LED
Ã
Power key
Ä
3.5 mm output jacks (under weather cap)
Remote Control Keys
À
Select to use rapid launch.
Á
Select to switch between remote launcher mode and dog training
mode.
Â
Select to play the receiver sound.
Ã
Select to activate the left port of the receiver.
Ä
Select to activate the right port of the receiver.
Å
Select to change the active receiver or to select the order of rapid
launch activation.
Æ
Select to change the receiver sound.
Remote Control Display
À
Selected receiver number
NOTE:
A letter indicating the order of rapid launch activation may
also appear. L indicates left ports activate first, and r indicates right
ports activate first.
Á
Battery charge level
Â
Selected sound
Receiver Pairing
You can pair the PRO Control 2 handheld device with a PRO
Control 2 receiver (
Pairing a PRO Control 2 Receiver
,
page 2
) or a PRO Control G Series receiver (
Pairing with a
PRO Control G Series Receiver
, page 2
).
Pairing a PRO Control 2 Receiver
Before you can control a PRO Control 2 receiver with the
handheld device, you must pair them.
1
On the handheld device, select
MODE
, and select the remote
launcher mode (
Selecting an Operating Mode
, page 1
).
When you are in remote launcher mode, training mode
indicators
À
do not appear on the LCD display of the
handheld device.
2
On the handheld device, select
or
to select the number
of the receiver to pair.
The number of the receiver appears on the LCD display of
the handheld device.
3
Hold the power key from 3 to 5 seconds until the LED on the
receiver is solid green and changes to solid blue.
You can perform this step even if the receiver is turned off
initially. You must continue to hold the power key while
pairing.
4
While the LED on the receiver is blue, select
L
,
R
, or
on
the handheld device.
The handheld device beeps when the devices are paired.
5
Select
to verify that the receiver paired.
CAUTION
The speaker is very loud. You should avoid activating the
speaker near a person. If you must use the speaker near a
person, muffle the speaker before activating it to decrease
the volume.
The speaker plays the current sound.
Pairing with a PRO Control G Series Receiver
Before you can control your receiver with your PRO Control 2
handheld device, you must pair the receiver with the handheld
device.
1
On the handheld device, select
or
to choose the
number with which to pair the receiver.
TIP:
The selected number determines the sound played by
receiver when you select
(
PRO Control G Series Receiver
Sounds
, page 4
).
2
If necessary, turn on the receiver.
3
On the receiver, select
SET
.
2
Remote Training Devices