Garmin StreetPilot 2730 Owner's Manual - Page 29
Loading Files on Your 2730, Step 1: Load the USB Drivers, Step 2: Connect AC Power - memory
UPC - 753759053628
View all Garmin StreetPilot 2730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
LOADING FILES ON YOUR 2730 LOADING FILES ON YOUR 2730 Your 2730 can store files, such as MP3 music files and audible books. Using the USB Mass Storage mode, copy and paste files to the 2730 internal memory. Step 1: Load the USB Drivers Before connecting the USB cable to your computer, place the enclosed USB Driver CD-ROM into your computer's CD-ROM drive. If the CD-ROM does not start automatically, click Start and then Run.... Type the letter of your CD-ROM drive followed by "setup" (example: "D:\setup"). Then press Enter. Follow the on-screen instructions. Step 3: Connect the USB Cable Use the USB cable provided to connect the 2730 to your computer. Also use the USB cable when updating the StreetPilot software or loading additional maps. To connect your StreetPilot to your computer: 1. Plug the small end of the USB cable into the connector located on the back of your StreetPilot. 2. Connect the larger end of the USB cable to an available USB port on your computer. Step 2: Connect AC Power Connect the enclosed AC Power cable to the Power connector on the back of the StreetPilot. Connect the end to an available electrical outlet. StreetPilot 2730 Owner's Manual 21