Garmin VHF 300i Owner's Manual - Page 37
Modifying the Operating Settings, Turning the Auto Power-On Setting On or Off
UPC - 753759094683
View all Garmin VHF 300i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Advanced Operation • OFF-the radio will not send data for this vessel. Distress call information will still be sent. Modifying the Operating Settings Modifying the Backlight and Contrast Settings 1. Press the MENU key. 2. Select SYSTEM > DISPLAY > BACKLIGHT or CONTRAST. 3. Turn the Channel knob to adjust the backlight or contrast. "MAX" represents the maximum setting, and the number 1 represents the minimum setting. 4. Select CANCEL to disregard your changes and return to the previous screen. Select OK to save your changes and return to the Home screen. Modifying the Beeper Setting You can change the volume of the beeper tone that sounds when you press keys or the Channel knob, or you can turn the beeper tone off. 1. Press the MENU key. 2. Select SYSTEM > BEEPER. 3. Select from the following options: • OFF-the radio does not beep when you press keys, or when you press the Channel knob. • QUIET or LOUD-set the beeper volume level. Turning the Auto Power-On Setting On or Off 1. Press the MENU key. 2. Select SYSTEM > AUTO POWER-ON. 3. Select ON or OFF. Configuring Whether Latitude and Longitude are Displayed on the Home Screen You can display the latitude and longitude on the home screen if you have a GPS device connected to your radio, or if you enter position data manually. 1. Press the MENU key. 2. Select SYSTEM > NUMBERS > LAT/LONG. 3. Select from the following options: • AUTO-latitude and longitude information is displayed on the Home screen. • HIDE-latitude and longitude information is not displayed on the Home screen. VHF 300 Series Owner's Manual 31