Garmin VHF 300i Owner's Manual - Page 8

Getting Started Garmin GHS Series Handset Display The Home screen is the most-viewed screen in the system. It displays all of your current information, such as the current channel, the frequency band, and the channel name. System-status icons RX TX 25W 1W LOC ATIS DISTRESS USA Frequency band Channel 16 ˆ‰:‹Œ UTC ""MPH ˆ'"°T - REPEAT PA SCAN Latitude Longitude Time Speed Over Ground/ Course Over Ground Soft keys Channel-current working channel. Frequency band-current frequency band: International, Canadian, or USA. Latitude, Longitude, and Time-current latitude, longitude, and time are displayed if the transceiver is connected to a GPS device. If the transceiver is not connected to a GPS device, you can manually enter the position and the time that you entered the position data. Speed Over Ground (SOG)/Course Over Ground (COG)-current SOG or COG is displayed if the transceiver is connected to a GPS device. Soft keys-used to select items. The function of these keys changes depending on what you are doing. System-status icons-see the following table. Battery status 1W Transmitting at 1 watt RX Squelch level is broken by reception of an incoming signal Saved channel Position tracking enabled Weather alert Incoming or missed DSC call External GPS connected TX Transmitting LOC Receiver mode for areas with radio frequency interference (such as harbors) Outgoing voicemail 25W Transmitting at 25 watts ATIS ATIS enabled Auto channel changing disabled  VHF 300 Series Owner's Manual