Garmin VHF200 Owner's Manual - Page 12
Scanning and Saving Channels, Transmitting with the Radio or the Handset - turns itself on
UPC - 110510107912
View all Garmin VHF200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Basic Operation Transmitting with the Radio or the Handset 1. Select the appropriate channel. 2. Check to ensure that the channel is clear before transmitting. The Federal Communications Commission (FCC) and international regulations require that you not obstruct the communications of others. 3. Press the PTT key on the microphone or the handset to transmit on the current channel. The TX icon is displayed at the top of the screen. 4. Speak your message and release the PTT key. NOTE: Five minutes is the maximum amount of time for transmission. After you have pressed PTT key for five minutes, PTT is disabled until you release the PTT key. Bypassing the LO (1 W) Transmission Power Setting In the USA frequency band, transmissions on Channels 13 and 67 are required to be lowpower (1 watt) by default. You can bypass this power setting by pressing the 25W soft key during transmission. 1. If you are on USA Channels 13 or 67, when you press the PTT key, the screen displays a message to press 25W to bypass the 1 W transmission requirement. 2. Press and hold the 25W soft key to broadcast on HI. The radio bypasses the 1 W transmission requirement when you are pressing the 25W soft key. Scanning and Saving Channels Important: If you turn on ATIS, the radio cannot scan or save channels. See page 13. Scanning All Channels When you scan channels, the radio searches for channels that are broadcasting. If a channel is broadcasting, the radio pauses on that channel until the broadcast stops. After four seconds of inactivity on the channel, the radio resumes scanning. 1. Select SCAN > ALL. 2. Choose from the following options: • SKIP-this option is displayed if active channels are detected. When you select this option, the system resumes the scan and does not include that channel in subsequent passes. • +CH16-Channel 16 is scanned every other channel (for example: 21, 16, 22, 16, and so on). "ALL SCAN +CH16" is displayed on the screen. • -CH16-Channel 16 is scanned in its normal order (for example, 14, 15, 16, 17, and so on). "ALL SCAN" is displayed on the screen. • EXIT-returns you to Home screen. The system ends the current scan and continues to receive on the channel where you ended the scan. VHF 100/200 Series Owner's Manual