Garmin VIRB XE Cycling Bundle Owners Manual - Page 5
Opening the Front Cover, Installing a Memory Card, Installing the Desiccant Pack, Installing
View all Garmin VIRB XE Cycling Bundle manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Introduction WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. It is your responsibility to use the device in a safe manner. Garmin® will not be responsible for any property damage, injuries or deaths resulting from any use of this device in any activities. Opening the Front Cover You must open the front cover to install the battery, memory card, and anti-fog desiccant pack. 1 Grip the top and bottom of the latch and pull to open the À latch. 3 Insert the desiccant tray into the desiccant slot. 4 Close and latch the front cover. The indicator dot on the desiccant pack turns pink when the desiccant pack becomes saturated. Heat the desiccant pack at 85°C (185°F) for 60 minutes to dry the desiccant pack for reuse. 2 Open the front cover. Installing a Memory Card You must install a microSD™ memory card to use your device. For optimal performance, use a class 10 or better memory card. 1 Open the front cover. 2 Insert the memory card into the memory card slot with the À contacts facing the lens. Installing the Battery WARNING This product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage caused by battery exposure to extreme heat, store the device out of direct sunlight. 1 Open the front cover. 2 Locate the metal contacts on the end of the lithium-ion battery. 3 Insert the battery into the compartment, contacts first. À 3 Press in the card until it clicks. 4 Close and latch the front cover. Installing the Desiccant Pack WARNING Do not eat desiccant packs. Desiccant packs contain silica, which may cause irritation in your digestive system. Desiccant packs are harmful if swallowed by an infant or pet due to choking hazard. You should install an anti-fog desiccant pack for optimal performance and fog resistance. 1 Open the front cover. 2 Insert the desiccant pack into the desiccant tray . À 4 Press the battery into place. 5 Close and latch the front cover. Charging the Battery NOTICE To prevent corrosion, thoroughly clean and dry the contacts and the surrounding area on the side of the device before charging or connecting to a computer. Refer to the cleaning instructions in the appendix. Do not attempt to use the device to charge a battery that was not provided by Garmin. Attempting to charge a battery that was not provided by Garmin can damage the device and void the warranty. 1 Plug the USB cable into a USB port on your computer. 2 Align the charger posts with the contacts on the side of the device, and press the charger until it clicks. À Introduction 1