Garmin Volvo Penta Glass Cockpit System Owner's Manual - Page 12

• To receive or ignore Search and Rescue Transponder (SART) test signals, select AIS-SART Test. Turning Off AIS Reception AIS signal reception is turned on by default. Select Settings > Other Vessels > AIS > Off. All AIS functionality on all charts and 3D chart views is disabled. This includes AIS vessel targeting and tracking, collision alarms that result from AIS vessel targeting and tracking, and the display of information about AIS vessels. Chart and 3D Chart View Settings NOTE: Not all settings apply to all charts and 3D chart views. Some options require premium maps or connected accessories, such as radar. These settings apply to the charts and 3D chart views, except the Radar overlay and Fish Eye 3D (page 6). From a chart or a 3D chart view, select Menu > Chart Menu. Waypoints & Tracks: See page 6. Other Vessels: See page 6. Surface Radar: Shows surface radar details on the Perspective 3D or Mariner's Eye 3D chart views. Weather Radar: Shows weather radar imaging on the Perspective 3D or Mariner's Eye 3D chart views. Navaids: Shows navigational aids on the Fishing chart. Chart Setup: See page 6. Chart Appearance: See page 6. This might appear in the Chart Setup menu. Navigation and Fishing Chart Setup NOTE: Not all settings apply to all charts and 3D chart views. Some settings require external accessories or applicable premium charts. From the Navigation chart or Fishing chart, select Menu > Chart Menu > Chart Setup. Photos: Shows camera icons in some areas when using some premium charts. This enables you to view aerial photos of landmarks (page 4). Tides & Currents: Shows current station indicators and tide station indicators on the chart (page 4). Service Points: Shows locations where marine maintenance and repair services may be obtained. Roses: Shows a compass rose around your boat, indicating compass direction oriented to the heading of the boat. A true wind direction or apparent wind direction indicator appears if the chartplotter is connected to a compatible marine wind sensor. Inset Map: Shows the navigation inset when the vessel is navigating to a destination. Weather: Sets which weather items are shown on the chart, if the chartplotter is connected to a compatible weather receiver with an active subscription. Lake Level: Allows you to enter the present level of the lake. Chart Appearance: See page 6. Waypoints and Tracks Settings on the Charts and Chart Views From a chart or a 3D chart view, select Menu > Chart Menu > Waypoints & Tracks. Tracks: Shows tracks on the chart or 3D chart view. Waypoints: Shows the Waypoints list (page 8). New Waypoint: Creates a new waypoint. Waypoint Display: Sets how to display waypoints on the chart or 3D chart view. Active Tracks: Shows the active track options menu. Saved Tracks: Shows the list of saved tracks (page 10). Tracks Display: Sets which tracks to display on the chart or 3D chart view based on track color. Chart Appearance Settings You can adjust the appearance of the different chart views. Each setting is specific for the type of chart view that you are in. NOTE: Not all settings apply to all charts and 3D chart views and chartplotter models. Some options require premium maps or connected accessories, such as radar. From a chart or 3D chart view, select Menu > Chart Menu > Chart Setup > Chart Appearance. Orientation: Sets the perspective of the map. Detail: Adjusts the amount of detail shown on the map, at different zoom levels. Heading Line: Shows and adjusts the heading line, which is a line drawn on the map from the bow of the boat in the direction of travel, and sets the data source for the heading line. World Map: Uses either a basic world map or a shaded relief map on the chart. These differences are visible only when zoomed out too far to see the detailed charts. Spot Depths: Turns on spot soundings and sets a dangerous depth. Spot depths that are equal to or more shallow than the dangerous depth are indicated by red text. Safety Shading: Sets the shades from the shoreline to the specified depth. Depth Range Shading: Specifies an upper and lower depth to shade between. Symbols: Shows and configures the appearance of various symbols on the chart, such as the vessel icon, navaid symbols, land POIs, and light sectors. Style: Sets how the chart appears over 3D terrain. Hazard Colors: Shows shallow water and land with a color scale. Blue indicates deep water, yellow is shallow water, and red is very shallow water. Safe Depth: Sets the appearance of a safe depth for Mariner's Eye 3D. NOTE: This setting affects only the appearance of hazard colors in Mariner's Eye 3D. It does not affect the safe water depth Auto Guidance setting or the sonar shallow water alarm setting. Range Rings: Shows and configures the appearance of range rings, which help you to visualize distances in some chart views. Lane Width: Specifies the width of the navigation lane, which is the magenta line in some chart views that indicates the course to your destination. Other Vessels Settings on the Charts and Chart Views NOTE: These options require connected accessories, such as an AIS receiver or VHF radio. From a chart or a 3D chart view, select Menu > Chart Menu > Other Vessels. AIS & MARPA List: Shows a list of AIS and MARPA vessels. DSC: Shows the DSC list and sets the DSC trails on the chart. Collision Alarm: Sets the safe-zone collision alarm (page 5). Display Setup: See page 5. Fish Eye 3D Settings NOTE: This feature is available with premium charts, in some areas. 6 Charts and 3D Chart Views