Gastroback 40117 User Manual - Page 13

Storage, Trouble Shooting Guide

Page 13 highlights

Storage Always clean the appliance before storing (see ›Care and cleaning‹). Ensure to store the appliance where it is clean, dry and safe from frost, unacceptable strain (mechanical or electric shock, heat, moisture) and where it is out of reach of young children. DO NOT place any hard or heavy objects on the appliance. Trouble Shooting Guide On any problems occurring that are not mentioned here, please contact your authorised service centre. To get more information about the appliance, contact Gastroback GmbH, Gewerbestr. 20, D-21279 Hollenstedt (Germany), Phone: +49 (0) 4165 / 22 25-0. The Problem The Easy Solution The motor will not work, when switched ON. The appliance is possibly not assembled correctly. Refer to ›Assembling the Juicer‹. The motor appears to stick or stall. Immediately switch OFF the Juicer and unplug from power outlet. Refer to ›Remove blockage‹. Excessive pulp building up in the filter basket Immediately switch OFF the Juicer and unplug from power outlet. Refer to ›Remove blockage‹. The pulp is too wet and you get an insufficient amount of juice Try to work slower. Remove excess fibre building up in the mesh and blocking the fine pores. Remove the filter basket and brush out remaining pulp under running water (see ›Care and cleaning‹). Juice leaks between the rim of the Try to work slower. Push the food pusher down juice collector and the juicer cover. gently and slowly. Juice sprays out from the spout. Try to work slower. Push the food pusher down gently and slowly. Juice overflows the brim of the motor base. Immediately switch OFF and unplug the juicer. Possibly the juice collector and/or spout is blocked. Clean the juice collector (see ›Care and cleaning‹). 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

37
STORAGE
Always clean the appliance before storing (see ›Care and cleaning‹). Ensure to store the
appliance where it is clean, dry and safe from frost, unacceptable strain (mechanical or
electric shock, heat, moisture) and where it is out of reach of young children.
DO NOT
place any hard or heavy objects on the appliance.
TROUBLE SHOOTING GUIDE
On any problems occurring that are not mentioned here, please contact your authorised
service centre. To get more information about the appliance, contact Gastroback GmbH,
Gewerbestr. 20, D-21279 Hollenstedt (Germany), Phone: +49 (0) 4165 / 22 25-0.
The Easy Solution
The appliance is possibly not assembled correctly.
Refer to ›Assembling the Juicer‹.
Immediately switch OFF the Juicer and unplug
from power outlet. Refer to ›Remove blockage‹.
Immediately switch OFF the Juicer and unplug
from power outlet. Refer to ›Remove blockage‹.
Try to work slower. Remove excess fibre building
up in the mesh and blocking the fine pores.
Remove the filter basket and brush out remaining
pulp under running water
(see ›Care and cleaning‹).
Try to work slower. Push the food pusher down
gently and slowly.
Try to work slower. Push the food pusher down
gently and slowly.
Immediately switch OFF and unplug the juicer.
Possibly the juice collector and/or spout is
blocked. Clean the juice collector (see ›Care
and cleaning‹).
The Problem
The motor will not work,
when switched ON.
The motor appears to stick or stall.
Excessive pulp building up in
the filter basket
The pulp is too wet and you get
an insufficient amount of juice
Juice leaks between the rim of the
juice collector and the juicer cover.
Juice sprays out from the spout.
Juice overflows the brim
of the motor base.