Gastroback 40117 User Manual - Page 7

Assembling the Juicer Before first use, clean all removable parts of the juicer in warm soapy water (see ›Care and Cleaning‹). For assembling please refer to the figures above (see ›Get know your Juicer‹). WARNING: Please handle with care. There are extremely sharp cutting blades in the base of the filter basket and a sharp protrusion in the feed chute. Before you plug in the juicer, always ensure that the appliance is assembled correctly. 1. Place the juice collector on the top of the motor base. 2. Lock the juice collector by pushing it slightly down and rotating it counter-clockwise as far as possible without violation. 3. Insert the filter basket inside the juice collector. Rotate the filter basket in the juice collector until it is seated on the gear. The upper edge of the filter basket may not protrude the juice collector. CAUTION: Rotate the filter basket to ensure that it is mounted properly and will not wobble or tilt. The filter basket must rotate easily and without rubbing on the juice collector. 4. Place the juicer cover over the juice collector. The juicer cover can only be mounted in the correct orientation: The feed chute must be centred above the filter basket, the juicer cover must seat firmly on the rim of the juice collector and the safety cover lock slips into the locking slot of the juice collector. 5. Rotate the juicer cover clockwise until the safety cover lock slips into the locking slot of the juice collector. 31