Gastroback 41403 User Manual - Page 18
Solving Problems
View all Gastroback 41403 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Solving Problems If any problems occur during operation, you will find solutions in the following table. Additionally, you can contact your vendor. Problem Possible Cause The motor does not work, The appliance is not live. the indicators are dark. Solution Insert the power plug in the power outlet. The power switch is switched Switch on the power switch. OFF. The circuit breaker is activa- Press the red button at the bot- ted. tom of the appliance. The motor does not work, the buttons are illuminated. The overheat protection switched off the appliance. The cutter housing is blocked. Let the motor cool down (See: ›Overheat protection‹). Switch to reverse operation for a moment (See: ›Clearing a blocking - reverse operation‹) The reverse operation does not work. The ON/ OFF button is illuminated blue. You cannot start reverse operation, while forward operation is switched on. Switch off the ON/OFF button. This button must be illuminated white to activate reverse operation. Try again. The motor works too slow- The cutter housing is blocked. ly. Switch to reverse operation for a moment (See: ›Clearing a blocking - reverse operation‹). You push down the pusher too Decrease the pressure of violently. pushing. Too hard parts are still in the Remove any hard parts before foods. processing your foods. The food is too hard. Juice drips from the cutter The food is too watery. housing. Only process foods that have a similar consistency as meat. Cook hard vegetables before processing. Cut the food in smaller pieces. Do not process food that is too juicy. Dab dry before processing. 42