Gastroback 42712 User Manual - Page 26
Possible Causes
View all Gastroback 42712 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Problem Coffee not strong enough / too strong Coffee not hot enough I cannot select the 'FLAVOUR' setting Machine takes a long time to brew Machine uses a lot of coffee Amount brewed is too little / too much I cannot select a certain carafe amount POSSIBLE CAUSES WHAT TO DO Strength setting is incorrect. Check the selected strength setting displayed on the LCD screen. To change the strength setting, refer to 'Select the Brew Strength or 'PRE-GROUND' Coffee Setting'. A pre-heated coffee basket, carafe or cup will help maintain the coffee's optimal temperature and keep coffee hotter for longer. Fill with hot water for about 30 seconds then discard the water. The 'FLAVOUR' setting is only selectable in SINGLE CUP mode. The Brew IQ System will intelligently pre-heat and dose grinds for optimum temperature and taste. This may result in longer grinding, pre-heating and brewing times than what you are normally used to. If you would like to reduce the overall brewing time and are using SINGLE CUP mode, select a lower flavour setting. The 'LITE' setting will steep for less time, however this will produce a lighter flavoured coffee. The Brew IQ System has been calibrated to dose the optimum water to coffee grinds ratio to achieve the best flavour profile. Depending on the strength setting selected, this may result in more coffee being ground than what you are normally used to. However the result will be a bolder, more full-flavoured coffee. If you would like to use less coffee beans, select a lower strength setting. There is excessive mineral build-up affecting De-scale the machine. Refer to 'Removing the performance of the machine. Calcium Build-Up'. The volume calibrations need to be reset. Recalibrate the machine by flushing it twice. Refer to 'Using the YouBrew - Carafe Mode. First Time Use Only'. The water tank was filled once the coffee machine had already started a brewing cycle. Always fill the water tank before starting a brewing cycle. The brew sizes are approximate only. Actual amounts may vary due to the type of filter used, the coffee bean size, roast, blend and freshness, or amount and type of pre-ground coffee used. These factors affect the amount of water retained by the coffee grounds. The minimum carafe amount is 2 cups, Press open the flip-top water tank lid. Pour while the maximum is the number of cups the desired amount of cold, preferably of water in the tank, up to 12 cups. filter water. 58