Gateway E-100M Component Replacement Manual (Vista) - Page 8

9 Pull the memory module out of the slot. 10 Hold the replacement module at a 30-degree angle and insert it into the empty memory slot. This module is keyed so it can only be inserted in one direction. If the module does not fit, make sure that the notch in the module lines up with the tab in the memory bay. Replacing the Memory Module 11 Gently push the module down until it clicks in place. 12 Replace the memory bay cover, then tighten the cover screw. 13 Insert the battery, then turn your notebook over. 14 Reconnect the optional port replicator. -ORConnect the power adapter, the modem cable, and the network cable. 15 Reconnect all peripheral devices that were connected to the notebook and replace any PC Cards. 16 Turn on your notebook. Technical Support See the label on the bottom of the notebook for Customer Care Information. See your Reference Guide for important safety, regulatory, and legal information. 2 www.gateway.com © 2007 Gateway, Inc. All rights reserved. Gateway and eMachines are trademarks or registered trademarks of Gateway, Inc. in the United States and other countries. All other brands and product names are trademarks or registered trademarks of their respective companies.