Gateway GT5436E 8511861 - Gateway Computer Hardware Reference for Windows Vist - Page 46
Adding or replacing a hard, drive
View all Gateway GT5436E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
CHAPTER 4: Upgrading Your Computer 5 Slide the new card reader into the bay from the front of the case. Screws 6 Use the screws you removed previously to secure the card reader to the bay. 7 Connect the new card reader's data cable to the system board. 8 Reinstall the bezel by following the instructions in "Replacing the front bezel" on page 32. 9 Reinstall the computer case's side panel by following the instructions in "Replacing the side panel" on page 33. Adding or replacing a hard drive To add or replace a hard drive: Tools You need a Phillips screwdriver to add or replace a hard drive. 1 Remove the side panel by following the instructions in "Removing the side panel" on page 31. 2 If you are adding a new drive, go to Step 4. If you are replacing an existing drive, go to the next step. 40