GE 29096GE1 User Guide - Page 16
Aller, Essages
UPC - 044319003499
View all GE 29096GE1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
CHANGING THE NUMBER FORMAT The options button lets you change the format of the displayed number. The available formats are as follows. 7-digit 7-digit telephone number. 10-digit 3-digit area code+ 7-digit telephone number. 11-digit long distance code "1" + 3-digit area code + 7-digit telephone number. 1. Use the arrow buttons to scroll to the number you want to call back. 2. Press the dial button. If the number is 7, 10, or 11 digits, ADJUST shows in the display. NOTE: If the number does not dial as shown, press the options button. Repeat if necessary, until the correct number of digits is shown. 3. If the phone is off the hook, the display counter counts down from three to zero seconds. During this time you may press the options button and adjust the number format. When you are fininshed the number automatically dials. 16 IMPORTANT: All phones on the line must be on the hook for this feature to work. 4. If the phone is on the hook, the counter counts down from ten to zero seconds. During this time, you may press the options button to adjust the number format. Pick up the handset before the phone turns to idle mode and the phone number automatically dials. 5. Press the flash button to exit and return to review mode. CALLER ID MESSAGES The following special messages indicate the status of a message or the unit: NO CALLS The call record log is empty. UNKNOWN CALLER The incoming call does not have Caller ID service or its service area is not linked to yours. If UNKNOWN CALLER appears along with a calling number, the name information for that number is not available. Downloaded from www.Manualslib.com manuals search engine