GE 29451 User Guide - Page 15

SETTING UP YOUR STATION ADDRESS Your phone has the ability to be set up as either a 2-9451 (the default), or a 2-9450. If you have an existing 2-9450 system, this phone can be set to be fully compatible with your system. See "Changing the Phone to a 2-9450 Model". VERY IMPORTANT: In order to have full system operation of your phone (i.e. intercom, transfer, page, etc.), lines 1 and 2 must be connected and common to all phones connected to the system. Only other 2-9451 or 2-9450 models are compatible for full system operation. Also, the telephone lines must be connected before AC power is connected. The phone may not install properly, otherwise. The display reads Addr-. 1. Enter the station address number you want to assign (01-16) or press the corresponding memory button. The display indicates what station you have entered. 2. Press the # key to confirm.The INTERCOM indicator flashes red as it checks the system line connections and station address. If the line cords are connected properly and the station address is valid, you will hear a confirmation tone. This indicates that the station address has been successfully assigned. TONE 3 1234 REDIAL DATA PORT LINE EXT. NUMBER STORE IN TIMER TIME SET MEMO REVIEW LOWER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 BUSY REDIAL FLASH PAUSE TRANSFER CONF CALL PRIVACY VOLUME 1 2 ABC 3 DEF 4 GHI 5 JKL 6 MNO 7 PQRS * TONE 8 TUV 0 OPER 9 WXYZ # LINE 4 LINE 3 LINE 2 LINE 1 HEADSET MUTE SPEAKERPHONE HOLD INTERCOM INTERCOM indicator 11