GE 29451 User Guide - Page 18
System Verification
UPC - 044319294514
View all GE 29451 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
SYSTEM VERIFICATION The following procedures should be used to test the system's configuration and identify possible line connection errors. The phone must be connected to the AC power outlet, lines 1 and 2 must be connected to the LINE 1,2 jack, and the phone must be programmed with a station address number. OTHER STATIONS 1. Press LINE 1. 2. Look at all the other stations. If they all indicate line 1 is being used, the connection is correct. OR 1. Press the INTERCOM button. The display reads INT- and the INTERCOM indicator comes on. 2. Enter a station address to check by using the keypad. The display indicates what station you have entered. If the station you entered is connected to the system, a paging sound will be heard at the station you are calling and the INTERCOM indicator will flash red. If the station is not connected to the system, you will hear an error tone, and intercom will be cancelled. YOUR STATION 1. Press REVIEW. 2. Press INTERCOM. The display will read Addr- with the two-digit station address (01-16). NOTE: To change the station address, see "Changing a Station Address". 14